Keyence SR code readers, reliable reading on your line.
Barcodes, QR codes and GS1 DataMatrix on labels, cartons or parts: we mount, set up and connect SR readers, on the line, at a fixed station or for re-inspection.
A code read, then sent to the right place.
1D and 2D codes
Barcodes, QR and GS1 DataMatrix codes, with decoding of the data needed for serialization.
Mounting and settings
Distance, angle, reading field and lighting set for your substrate and your line speed.
Difficult codes
Low contrast, shiny or curved surfaces, direct part marking: we assess these cases on your samples.
Connection and data
Code read and GS1 data sent to the PLC, the MES or your serialization software.
From your samples to commissioning.
Sample testing
You send photos, codes or parts. We prove the reading or detection before any commitment.
measured test resultsDesign
Optics, lighting, mechanics, PLC, software and connections. Vision succeeds or fails on lighting and integration.
machine design file + quoteBuild
Station or machine assembled and tested in our workshop in the Var, with your parts.
machine tested in the workshopCommissioning
On-site installation, PLC and MES connection, operator training, start-up support.
machine in production
Batch to re-inspect, relabeling? Temporary verification station.
Complaint, recall, doubtful codes: we install a temporary reading and verification station to re-inspect your products while the permanent solution is being built.
Vision, plus the machine around it.
A vision system is only useful once integrated: conveying, rejection, PLC, serialization software, operator interface. Our workshop builds the complete station, not just the camera program. Software and mechanics under one roof.
Your questions
Which SR readers do you integrate?
The full range of SR and SR-X fixed readers, chosen according to distance, field of view and code type. The model is decided after the test on your codes.
Can you read our GS1 DataMatrix codes?
The answer comes from the test: print quality, substrate and line speed determine the settings and the model.
Can you take over an SR reader that is already installed?
Yes: the existing settings, parameters and connection are reviewed, then corrected and documented.
What about handheld scanning?
SR readers are fixed readers. For handheld scanning, we develop applications on Zebra terminals.
Related solutions.
Keyence VS cameras
Selection, lighting, programming and takeover of VS cameras, PLC and MES connection, HMI.
keyence-integration/vs-camerasCustom serialization
We design your solution: inline, at a fixed station or on Zebra terminals, connected to your software.
serializationCustom machine vision
Industrial cameras programmed end to end: part inspection and code reading, from lighting to the MES connection.
custom-machine-visionSend a photo of your codes.
Labels, cartons or marked parts, line speed: we check reading with an SR reader.